 In
PDF Format
| Custom Imager Accessories |
|
| Accessories for Optical Brain
Imaging |
|
In addition to its Imager 3001 systems, OI sells a range of optical,
mechanical, and electrical accessories to help get your brain imaging
research efforts quickly under way. These include custom-designed
camera mounts, cranium sealing chambers, and illumination and imaging
optics. Specifications are subject to change without prior notice. |
|
|
OI's
powered tabletop camera mount offers complete freedom for camera positioning.
The three long-travel axes are controlled manually, or from a digital
panel which can record and return to a set position with micron precision.
The camera holding assembly can be tilted, rotated, and focused by
translation from the adjustable camera holder itself. Electronic control
of the translation focus is available by special order.
Camera mount control panel |
| Base |
90x100
cm |
Max. Height |
135 cm |
Degrees of Freedom |
6 |
|
|
Robotic camera mount
(isolation table not included; see below for installation dimensions)
|
|
OI's
cranium sealing chambers protect and re-pressurize exposed brain after
trepanning. Ports for sterile fluid exchange allow chronic maintenance
of subject animals. Two inner diameters are available: 20 mm titanium
(middle row), and 15 mm titanium (bottom). Chambers ship with single
gasket and coverslip; replacements available in lots of 20.
|
|
|
Macroscope for
fluorescence epi-illumination, including a complete filter set for
voltage-sensitive dye imaging with the new "blue dyes."
Together with the appropriate camera lenses (third party accessory,
sold separately), this assembly can provide up to 100x increase in
brightness relative to standard microscope lenses (see Ratzlaff and
Grinvald, 1991 for details). |
|
| Illumination/Imaging Filter
Set |
|
Set of filters
for use in intrinsic imaging experiments.
|
|
|
|
| Green |
546, 30nm
|
Orange |
605, 10nm |
Red |
630, 30nm |
IR |
700 bandpass 30nm |
IR |
810 bandpass 30nm |
|
- OD 3 neutral density filter
- KG1 heat filter
|
|
Includes components
pictured at left: lamp housing with tungsten-halogen lamp and integrated
KG1 heat filter, bandpass filter holder, shutter, light guide adaptor,
and double-ended liquid light guide with focusing lenses.
Note:
all specifications are subject to change without prior notice. |
|
|
Two models of respirator are available, designed for the size of the
subject animal. Different compression cylinder sizes are available
to further adjust ventilation volume. These ventilators come with
a start/stop option, which allows them to be remotely controlled by
Imager 3001 systems.
| Cat/Rabbit |
Cat. 6125 |
Rodent |
Cat. 7125 |
|
|
| Camera Lenses for Macroscope |
|
- Tandem lens assembly: two 50 mm lenses (f 1.2),
with back-to-back coupling ring and C-Mount adapter. For 1x magnification.
- 135 mm lens (f 2.0), for 2.7x or 0.37x magnification
(requires tandem lens assembly).
- 2x tele-converter for increasing or decreasing
magnification of tandem lens assembly by a factor of two (requires
tandem lens assembly).
|
|
| Kepco Stabilized DC Power Supply
for Illumination Lamp |
|
The Kepco JQE
15-25 (M) is a high-grade regulated power supply for use in stabilizing
preparation illumination. It provides adjustable DC output up to 15
volts and 10 amps. Ripple is < 0.1%.
Note: all specifications
are subject to change without prior notice.
|
|
| |
|
| |
|
